levert på 1 Cd-rom.
Pris NOK 1500,- eks. mva.
Innholdsfortegnelse:
1.
General Introduction
1.1
Introduction
1.2
Kinds of strain
1.3
Methods of surface finishing
1.4
Thermal spraying
1.5
Test
2.
Types of thermal spraying processes
2.1
Process description
2.2
Examples of spraying additives
2.3
Influencing of the spraying additives
2.4
Formation of coating layer
2.5
Test
3.
Overview of the different spraying methods
3.1
Introduction
3.2
Flame spraying with wire
3.3
Flame spraying with powder
3.4
Arc spraying
3.5
High velocity spraying
3.6
Plasma spraying
3.7
Test
4.
Overview of coating properties and adhesion mechanisms
4.1
Layer composition and coating structure – deformation behaviour of
sprayed particles
4.2
Mechanisms of pore formation
4.3
Chemical reactions of metallic spray powders
4.4
Layer adhesions
4.5
Tests
5.
Materials
5.1
Base materials
5.2
Spray additives
5.3
Tests
6.
Preparation and pre-treatment for thermal spraying
6.1
Introduction
6.2
Procedure for preparation of the base material component
6.3
Chemical cleaning/degreasing
6.4
Masking/covering
6.5
Blasting; removal of masking and postcleaning
6.6
Principle function of a blasting machine
6.7
Distance between blast nozzle and workpiece during blasting
6.8
Nozzle angle in blasting
6.9
Postcleaning
6.10
Further possibilities of roughening
6.11
Quality
6.12
Summary
6.13
Test
7.
7. Thermal
spraying
7.1
Types of thermal spraying processes
7.2
Spray parameter
7.3
Geometric influences
7.4
Quality control
7.5
Test
8.
Overview of maintenance and calibrating
8.1
Maintenance of spraying plants
8.2
Calibrating of test equipment and gauges
8.3
Test
9. Possibilities for posttreatment of sprayed layers
9.1
Thermal posttreatment
9.2
Chemical posttreatment
9.3
Mechanical posttreatment
9.4
Test
10. Measuring and testing – investigation of structure
and qualities of sprayed layers
10.1
Measures for quality assurance
10.2
Investigation of sprayed layers by light microscopy
10.3
Hardness determination of sprayed layers
10.4
Checking adhesion strengths of sprayed layers
10.5
Test
11.
Handling/mechanization and automation
11.1
Introduction
11.2
Manual thermal spraying
11.3
Mechanized thermal spraying
11.4
Automation
11.5
Tests
12.
Health, Protection and Industrial Safety; Environmental aspects
12.1
Introduction
12.2
Smokes and dusts
12.3
Gasses
12.4
Noise
12.5
Electric current
12.6
Heat
12.7
Radiation
12.8
Test
- bestill den
